Turn Windows 8 laptop into Wifi hotspot

To enable wireless network connection sharing on Windows 8, follow the steps below.

Picture 1 of Turn Windows 8 laptop into Wifi hotspot

Windows 7 has an Internet connection sharing function via ad-hoc protocol. However, on Windows 8 this function has been disabled, or more accurately hidden. Although it is unclear what the cause of this is from Microsoft, we can see the inconvenience. Want to share network connection via wireless waves, people often have to install an additional third-party program such as Connectify .

However, Microsoft does not "lock" this feature completely. To enable wireless network sharing, follow the steps below:

Step 1: Prepare the network card

- Press Windows + R key combination, type ncpa.cpl to access the network card management window.

Picture 2 of Turn Windows 8 laptop into Wifi hotspot

Right-click the wireless network card and select Properties.

Picture 3 of Turn Windows 8 laptop into Wifi hotspot

- Go to the Sharing tab , select the first option and uncheck the second option to allow other devices to use your device's Internet connection. Select the network card that has an Internet connection to share.

Picture 4 of Turn Windows 8 laptop into Wifi hotspot

- OK and exit.

Step 2: Tips with the command line

- Press Windows + X key combination or right click on the lower left corner of the screen, run Command Prompt window under Admin , select Ok when a message appears.

Picture 5 of Turn Windows 8 laptop into Wifi hotspot

- Type the command line:

netsh wlan set hostednetwork mode = allow ssid = 'your network name' key = 'your password'

For example:

netsh wlan set hostednetwork mode = cho phép ssid = 'techz' key = 'Pa $$ w0rd'

Picture 6 of Turn Windows 8 laptop into Wifi hotspot

With the SSID is the network name you want others to see, and the key is the password of that network. With this password, your connection is protected by the WPA2-PSK (AES) security mechanism.

After finishing this step, by default, other people still cannot see your network because Windows has not activated the network name promotion service.

- Activate network name promotion mode:

netsh wlan start hostednetwork

Here, the work is completed. If you want to display information about the machines connecting to your network, use the command:

netsh wlan show hosted network

ncG1vNJzZmismaXArq3KnmWcp51kwba%2BzWauoqaUpMS0eZdmo5qopKS9brXNraZmr5mbtm60zq2qqaek